I've done 1000s of automatic gate installations in the past 30 years. This looks great on animation but not real thing. Concrete mounting brackets are too small for the size of the gate and wheels must be super heavy duty and serviceable since they wear out overtime. This only work for small very light gates and not the all steel type. Have a good structure engineer design it so its safe and efficient.
You are correct, this is NOT even a "Cantilever Gate" it is a "slider" at best. Not even that really. I was in the Fence, Gate, and Welding business for many years, they are showing Lawrence Track on he BOTTOM of the gate, there is nothing in the Cartoon to show what holds up the Top. In the real world this will not work at all. There are so many better ways to do it, BB
I agree with you partially. Some items are better if they are thicker. It depends entirely on the gate weight and width. If a gate weighs less than 200 kgs and width is not more than 2-3 meters, then this shall work. But for a longer & heavier gate, we need heavier parts. Please contact us for rolling shutter and sliding gate Indian motors with 2 year warranty, www.dynador.com
Hello, here the link to the configurator: configurator.himotions.it/, you have to select English on the drop-down menu at the top right. Regards Benincà Group
I do not see the top adjustable guide plate for the section where the gate closes on your website. Is that a separate piece or is the same as the guide plate on the sliding side? I'm talking about the piece on minute 6 of the video. Thanks!
Good Morning, yes the product is 269.2. You can see at this link! regards www.himotions.it/it/categorie/cancelli-scorrevoli-su-rotaia/incontri-finecorsa-111/2692-114.html
Yes of course! Please contact us via the online form www.beninca.com/en/contacts/contact-us.html . We will provide you with the contact details of our nearest distributor
I am wanting a cheap way of making myself a cantilever gate and this is just the thing i am looking for, really great video,
MrHoggust
How did ur project go? I would like to see some videos too😃
Same to me because here South Africa we don't have them
Terlihat begitu rapi dan elegan ,tinggal kita produksi..
..
Hey! Take a look at our Hi-Motions catalog www.himotions.it/en to discover our entire product range.
I've done 1000s of automatic gate installations in the past 30 years. This looks great on animation but not real thing.
Concrete mounting brackets are too small for the size of the gate and wheels must be super heavy duty and serviceable since they wear out overtime.
This only work for small very light gates and not the all steel type.
Have a good structure engineer design it so its safe and efficient.
Alejandro Beso i used to see i gate same as this in this video it worked perfect
Good info thanks
Digigate motors
You are correct, this is NOT even a "Cantilever Gate" it is a "slider" at best. Not even that really. I was in the Fence, Gate, and Welding business for many years, they are showing Lawrence Track on he BOTTOM of the gate, there is nothing in the Cartoon to show what holds up the Top. In the real world this will not work at all. There are so many better ways to do it, BB
I agree with you partially. Some items are better if they are thicker. It depends entirely on the gate weight and width.
If a gate weighs less than 200 kgs and width is not more than 2-3 meters, then this shall work. But for a longer & heavier gate, we need heavier parts.
Please contact us for rolling shutter and sliding gate Indian motors with 2 year warranty, www.dynador.com
Very good technique
Can you plz tell me what should be the distance between 2 bottom bearings for a 7 Metre long gate weighing approximately 150 kgs
Hello, here the link to the configurator: configurator.himotions.it/, you have to select English on the drop-down menu at the top right. Regards Benincà Group
very good idea for technology
Nice video great
Thank you for your feedback ! Regards from Benincà Group
I install gates and have seen this system, it does not work, strong wind one hit from a car and its over
Joe what would you recommend?? I have a home in Baja Mexico-i need a really strong gate!!! thanks!!!
nice sliding door
Thank you! if you need more information, don't hesitate to contact us!
I do not see the top adjustable guide plate for the section where the gate closes on your website. Is that a separate piece or is the same as the guide plate on the sliding side? I'm talking about the piece on minute 6 of the video. Thanks!
Good Morning, yes the product is 269.2. You can see at this link! regards
www.himotions.it/it/categorie/cancelli-scorrevoli-su-rotaia/incontri-finecorsa-111/2692-114.html
،😇
ا
0
Hi can you tell me on which software you made this animation video
Thank you for your feedback. The video has been made using our 3D modeling product software.
I am doing this with the "ZW3D standard" software.
Can we get your company details
I make gates in durban south africa
so nyc thanks bro
Just Perfect door.
How can I get this gate bearing
Please contact us via the online form www.himotions.it/en/contacts.html . We will recommend you the nearest distributor in your area.
Thankfully
Nice Technic
How the circuit control. Thanks
Hi! Please contact us via the online form www.himotions.it/en/contacts.html . We will provide you with all the information required
Onde encontro esse kit Brasil
amazing technology
جيد جدا شكرا جزيلا
ممتاز 🌹
I really like
TOP!
nice technic
Thank you for your appreciation and feedback
Can I buy this product in Ontario Canada?
Yes of course! Please contact us via the online form www.beninca.com/en/contacts/contact-us.html . We will provide you with the contact details of our nearest distributor
It is very good
perfect
Em muon mua bo nay thi lien He lam sao
Teknik good bravo
Please give me this cantilever carriage sliding gate wheel
Hello Sohel, Please contact us via online form www.himotions.it/en/contacts.html We will recommend you the dealer closest to your area.
super tecnik
Very gooods
The gate will be to long than the opening... Simple fact
mohan shan
It depends on the weight of the gate and span.
Amazing
hasn't got shit on my elephant gates
Great to see that... I made it too. Plans from woodprix helped me a lot :)
very nice ..very good idea for technology
Good to me mates
@@hossainmokshedbd Yes:)
توجد بالعراق
Лайк 👍👍👍👋👋👋
♥️♥️♥️♥️🌹
Супер
Alguém possa mim ajudar nesse projeto.
🎉 3
Send me your address and contact number